Raing 額定:  

12A 250VAC（CQC、CB）

16A 125/250VAC（CQC、CB） 

ELECTRICAL(電氣特性):  

(接觸電阻)INITIAL CONTACT RESISTANCE:30mΩ Max. 

(操作力量)OPERATION FORCE:500±200gf 

(絕緣電阻)INSULATION RESISTANCE:100MΩ Min. 500VDC 

(電氣壽命)ENDURANCE:10,000 CYCLES 

(耐 電  壓)WITHSTAND VOLTAGE:1 KVAC FOR 1MINUTE MATERIAL  

(材      質)TERMINAL BASE:PHENOLIC LAMINATE(94V-0) 

              ACTUATOR:PBT+30%G.F.( 94V-0) 

              CONTACT:Ag AlloySPRING BLADE:STAINLESS STEEL 

規格詳細說明： 

1.APPLICATION TEMPERATURE RANGE (適用溫度范圍): -10-125°C 

2.TEST CONDITION  (測試環境):THE SWITCH IS TESTED AT A TEMPERATURE RANGE OF 5-35°C AND RELATIVE HUMIDITY RANGE OF 45-85%.           

     * 環境溫度范圍 : 5-35℃                                                                                   * 相對濕度范圍 : 45-85% 

3.  RATING (額定):16A 125VAC / 12A 250VAC 

4.  ELECTRONICAL PERFORMANCE (電氣性能):                                                     

    4-1.CONTACT RESISTANCE (接觸電阻):MEASURED BY FALL-OF-POTENTIAL METHOD AT DC 0.2V/1A SHOULD BE LESS THAN 50m? INITIAL.  

       * 以微電阻計在DC 0.2V/1A的測試規格值下, 接觸電阻值應該小于50mΩ.         

    4-2. INSULATION RESISTANCE (絕緣電阻):MEASURED WITH DC 500V APPLIED BETWEEN TERMINALS OF OPEN CONTACTS AND BETWEEN TERMINAL OF OPPOSITE POLARITY OR METAL PART. SHOULD BE MORE THAN 100M?.

       * 絕緣電阻計于DC 500V設定值下量測于開路的端子或不同回路的端子, 其絕緣電阻值應該大于100MΩ.                 

    4-3. DIELECTRIC STRENGTH (耐電壓):THE SWITCH SHALL WITHSTAND WITHOUT BREAKDOWN A POTENTIAL OF AC 1500V 0.5mA FOR MINUTE BETWEEN TERMINALS OF OPEN CONTACTS AND  TERMINALS OF OPPOSITE POLARITY OR METAL PART.

       * 不同極的兩支端子開路時, 必須通過一分鐘1500VAC 0.5mA的耐電壓.

       * 端子與外殼, 必須通過一分鐘1500VAC 0.5mA的耐電壓.